Robustel S6000U 7-in-1 industrial Modbus sensor product perspective

S6000U 7-in-1 Industrial Iot hardware Modbus Sensor

Robustel
Price
Save $0
/
  • In stock, ready to ship
  • Backordered, shipping soon
Shipping calculated at checkout.

S6000U industrial Modbus sensor buying guide

Best for

Industrial monitoring projects that need multi-parameter sensing and Modbus data integration with a gateway, router, or remote monitoring platform.

Not ideal for

Projects that require a standalone cellular device, long-range LoRaWAN sensing, or measurements outside the sensor's supported environmental range.

Key specs to check

Confirm measured parameters, accuracy requirements, Modbus integration, power and wiring, enclosure needs, gateway compatibility, polling interval, installation distance, and monitoring workflow.

Typical deployments

Facility telemetry, environmental monitoring, equipment rooms, smart buildings, remote industrial sites, and sensor-to-gateway data collection.

Technical resources and downloads

Use these official resources to verify specifications, plan deployment, manage software, and confirm support requirements.

Related comparison paths

Buyer questions

Is S6000U 7-in-1 Industrial Iot hardware Modbus Sensor a good fit for my project?

It is a strong fit when your project matches the use cases listed in the Best for section and the key specs align with your network, interface, environmental, and management requirements.

What should I confirm before ordering S6000U 7-in-1 Industrial Iot hardware Modbus Sensor?

Confirm regional connectivity, ports, power, mounting, operating environment, software features, management workflow, and whether you need accessories such as antennas, cables, sensors, or a gateway.

Can S6000U 7-in-1 Industrial Iot hardware Modbus Sensor be used for SCADA, PLC, or remote monitoring?

Many Robustel products are used in SCADA, PLC, and remote monitoring workflows. Match the required protocol, interface, bandwidth, and security requirements to the product specifications before deployment.

Where should I go next if I am comparing options?

Compare the related collection, review application articles in the Industrial IoT Blog, or contact Robustel with your site requirements for a technical recommendation.

Next steps

7-in-1 Industrial Modbus Sensor

Model: S6000U


Iot hardware modbus sensor Product Overview


The Robustel S6000U is a compact industrial sensor that integrates seven critical monitoring parameters into a single device. Designed for seamless integration into new or existing industrial systems such as PLC, it provides reliable, real-time data for environmental control, safety monitoring, and predictive maintenance.

  • All-in-One Environmental & Safety Monitoring

Integrates seven critical sensors—temperature, humidity, barometric pressure, ambient light, vibration, noise, and Time-of-Flight (ToF) distance—into a single compact device. This reduces complexity, lowers installation costs, and provides a comprehensive view of asset conditions.

  • Plug-and-Play Industrial Integration

Features a native RS-485 Modbus RTU interface for direct, reliable, out-of-the-box connection to PLCs, HMIs, and SCADA systems.

  • Actionable Data & Proactive Alarms

Features configurable parameters and Modbus addresses for flexible integration into any monitoring setup. Pre-configured alarm thresholds for key metrics (like vibration and temperature) allow the sensor to provide early risk detection and proactive safety alerts.

  • Compact & Rugged Design

Housed in a compact, lightweight, UL94 V-0 fire-retardant enclosure with a simple 3M adhesive installation for deployment anywhere.

 


Iot hardware modbus sensor Specifications

On-board Sensors

Sensor

Range / Sensitivity

Accuracy

Resolution

Temperature

-20°C to +70°C

±1.5°C

14 bit

Humidity

5% to 95% RH

±3% RH

14 bit

Barometric Pressure

26k to 126k Pa

±10 Pa

-

Ambient Light

0 to 64k lux

5-level light detection

16 bit

Noise

0 to 120 dB SPL (-26 DBFS sensitivity)

±5 dB

-

Vibration (Accelerometer)

-2g to +2g

±0.4 m/s²

16 bit

Tilt

0° to 90°

±2°

-

Time-of-Flight (ToF)

4 to 360 cm

±20 mm

-

Serial Port

● Ports: 1 x RS-485

● Baud Rate: 9600 to 115200 bps

● Protocol: Modbus RTU

● Connector: 3.5mm female terminal block

LED and Button

● Indicators: 2 x LED (RUN - Blue, Error - Red)

● Buttons: 2 x Button (RST, ISP)

Power Supply and Consumption

● Input Voltage: 9 to 24 VDC

● Connector: 3.5mm female terminal block

Physical Characteristics

● Protection: IP31

● Fire Protection Rating: UL94 V-0

● Housing and Weight: Plastic (PC + ABS), 30.5g

● Dimensions: 21.5 x 37 x 76 mm

● Installation: 3M adhesive fixation

● Operating Temperature: -20°C to +70°C

● Storage Temperature: -40°C to +85°C

● Relative Humidity: 5% to 95% RH (non-condensing)

Regulatory and Type Approvals

● Type Approvals: CE, UKCA, FCC, RCM

● Environmental: RoHS 2.0, WEEE

 

Iot hardware modbus sensor Applications

● Environmental Safety: Monitor temperature, pressure, and humidity in data centers, server rooms, and chemical facilities.

● Predictive Maintenance: Track machinery vibration and noise to detect anomalies and prevent downtime in manufacturing plants.

● Smart Logistics: Use ToF sensors for collision avoidance, object detection, and fill-level monitoring in automated warehouses.

● Energy Efficiency: Optimize HVAC and lighting systems in smart buildings with real-time temperature, humidity, and ambient light data.

 

Iot hardware modbus sensor Ordering Information

● Order code: A014600003

● Package contains: 1 x S6000U sensor, 1 x 3M adhesive fixation, 1 x 4-pin terminal block, 1 x 12V 1A global power adapter
You may also like
Recently viewed