Product view R2120 5G front perspective with four cellular and two Wi-Fi antenna connectors
Product views · supplied accessories depend on the selected configuration.
R2120 Industrial 5G PoE PSE Router
Power compatible IP cameras and access-control terminals with four IEEE 802.3af/at PoE PSE outputs, and connect the site over 5G NR or LTE. Evaluate multi-camera streams, parking entrances and temporary sites against actual coverage, uplink demand and the shared power budget.
- PoE power outputs
- 4 × PSE · ETH1–ETH4
- PoE standards
- IEEE 802.3af / at
- Per-port limit
- Up to 30 W at PSE
- Backhaul
- 5G NR SA / NSA + LTE
US$723 /unit
Shipping: US$40 per order worldwide.
Estimated delivery: 7–15 business days.
- Configuration
- Global-band 5G
- Key approvals
- CE · UKCA
PoE endpoint power. A 5G path for site data.
Power PoE endpoints. Connect the site over 5G.
Connect compatible cameras and access-control terminals over 5G NR or LTE. Match camera traffic, coverage and endpoint power to the installation, including parking entrances and temporary sites.
PoE IP cameras, ANPR cameras, door controllers and intercoms using IEEE 802.3af/at, within the verified power budget.
Optional: a compatible external PoE Wi-Fi access point.R2120-5GETH1–ETH4 source power and data. Five Gigabit Ethernet ports in total.
Match the SIM, operator coverage and data plan to the site. Confirm the RCMS service and required 5G firmware functions.
Choose power for your installation.
The four PoE ports share the available system power. Size the supply for the router and the combined peak demand of your connected devices.
Only ETH1–ETH4 source PoE; the fifth Ethernet port is not a PSE output. Do not infer a 120 W total. PoE PSE requires 44–57 V DC; 12–36 V DC applies to non-PoE mode. Allow for router consumption, peak loads and system limits.
Plan remote power-cycle recovery for PoE devices.
Plan a downstream-device recovery workflow that switches PoE output off and back on to restart a connected camera or compatible PoE endpoint. Confirm and test this control on the supplied R2120 5G unit with a supported firmware, RCMS app and service during commissioning.
- 01
Inspect the selected port
Check router connectivity, the intended endpoint and the reported PoE state.
- 02
Switch power off, then on
Use RCMS to disable the selected PoE output, then restore it after the endpoint’s required shutdown interval.
- 03
Verify the restart
Confirm that the endpoint boots and its video, network or application service returns. Coordinate access-control interruptions with site operations.
Confirm per-port PoE control with the firmware, RCMS app and service supplied for your R2120 5G. The router must remain reachable; remote switching is operator-controlled.
Technical specifications
Connectivity & management
| Parameter | Specification |
|---|---|
| Cellular | Global-band 5G NR SA / NSA with LTE fallback; dual Mini SIM (2FF) |
| Ethernet | 5 × 10/100/1000 Mbps; 1 WAN + 4 LAN or 5 LAN |
| PoE PSE | ETH1–ETH4; IEEE 802.3af / 802.3at |
| Per-port PoE rating | Up to 30 W at each PSE port; shared total output depends on the system power budget |
| Serial & I/O | 1 × RS-485; 2 × DI + 2 × DO |
| Operating system | RobustOS; RCMS-compatible |
| Selected Wi-Fi | 802.11a/b/g/n/ac, 2×2; 2.4 GHz / 5 GHz |
Power & installation
| Parameter | Specification |
|---|---|
| DC input | 44–57 V DC with PoE PSE; 12–36 V DC in non-PoE mode |
| Total PoE budget | Shared budget depends on PSU capacity, router consumption and confirmed system limits |
| Recommended PSU reference | 48 V DC / 1.25 A (60 W) manufacturer reference; verify the quoted adapter and connected load |
| Cellular antennas | 4 cellular antenna connections (SMA-K); selected pack includes 4 cellular antennas |
| Enclosure | IP30 aluminium; 49 × 105 × 143 mm |
| Mounting | Desktop, wall or 35 mm DIN rail; accessories depend on the selected pack |
| Router power reference | Up to 12 W at 48 V, excluding PoE consumption |
Specifications vary by model and hardware revision.
Recommended hardware configurations
Choose the model and regional configuration for your installation.
R2120 5G global-band accessory pack
- Manufacturer order reference
A015000006- Hardware model
- R2120-A5AAA-5G-A25GL
- Device reference
- B015000003
- Configuration
- Global-band 5G
- Key approvals
- CE · UKCA
A015000006 is the accessory-pack reference for R2120-A5AAA-5G-A25GL, device B015000003. Global describes the radio-band set. CE and UKCA are listed publicly; confirm the destination, operator and supplied configuration before ordering.
Included in this manufacturer pack
- 1 × R2120-5G router (B015000003)
- 4 × cellular antennas
- 2 × Wi-Fi antennas
- 1 × power adapter; confirm the rating and destination plug.
- 1 × DIN rail mounting kit
Plan separately
- SIM card and mobile data service
- PoE cameras / access-control terminals, Ethernet cables and installation equipment
- RCMS plan / service term
Estimated delivery: 7–15 business days. Listed software is supplied with the hardware. Timing can vary with availability, destination and customs clearance. Worldwide outbound shipping is US$40 per order, charged once regardless of the number of items. Import charges are separate unless included or collected in your confirmed order.
Frequently asked questions
What devices can R2120 power over PoE?
Connect compatible IEEE 802.3af/at PoE cameras, door controllers, intercoms and external Wi-Fi access points. Locks and gate motors need their own power and control design. Passive-PoE, 802.3bt and higher-power devices are not automatically compatible; check their power requirements.
How do I choose a suitable power supply?
PoE output requires 44–57 V DC; 12–36 V DC supports non-PoE operation only. Size the supply for the router and combined peak device demand. Up to 30 W per port does not mean four simultaneous 30 W outputs; check the available shared budget.
Can I restart connected PoE devices remotely?
Where supported by the installed 5G firmware, RCMS app and service, switching a PoE port off and back on can restart its connected device. Confirm PoE port-control support for your configuration; the router must remain online.
Which regional model should I choose?
A015000006 uses the A25GL global-band 5G configuration, with CE and UKCA listed for this model. Global-band describes supported radio bands, not approval in every country or acceptance by every carrier. Check local regulatory requirements, supported bands and operator acceptance for your destination.
Can R2120 be installed outdoors?
R2120 has an IP30 enclosure and needs a suitable protected enclosure for outdoor installation. Check the temperature limits of the supplied model and allow for heat inside the cabinet. Use appropriate cable entries, weather protection and a suitable power installation.